YBa2Cu3Oz超导体的低温稳定相

基于8点长方集团变分模型,并引入各向同性最近邻相互作用,以及各向异性次近邻相互作用,计算了YBa₂Cu₃O_z两Ba层间铜氧平面上□—O系统的有序—无序相变图,不仅在z=7.0附近得到具有超导电性的正交相,并且在z=6.5附近得到具有两倍晶格长度的另一种正交相(正交相Ⅱ)。 关键词：     

散斑条纹的快速高精度处理技术

本文提出一种快速高精度散斑杨氏条纹(斑纹)场处理方法——同态阀值滤波法。用它实现了散斑场条纹的快速、逐点连续高精度处理。     

ON THE ABRUPT CHANGE IN SOUTH ASIAN SUMMER MONSOON CLIMATE AND ITS SYNCHRONISM WITH THE GLOBAL RAPID WARMING

This paper has analysed the major characteristics of long-term variation, of summermonsoon climate in South Asia since 1888. An abrupt enhancement of summer monsoon inthe 1920s and its synchronism with the global rapid warming have been detected by theMann-Kendall Rank Statistic test. Based on diagnostic analysis on the atmospheric circulationover the monsoon region and the thermal conditions of both ocean and land during theperiod of abrupt change, it is found that the warming over land was stronger and earlierthan that over the ocean, which would enhance the land-sea thermal contrast and thereforebe favorable to the development of monsoon low and the disturbance in the monsoon flow.This may be a direct factor for the abrupt enhancement of summer monsoon.     

小角X射线散射法研究CH2Cl2,CHCl3和CCl4对PE液晶结构的影响

采用小角X射线散射法研究了CH_2Cl_2、CHCl_3和CCl_4对磷脂酰乙醇胺(PE)液晶结构影响的机理.CH_3Cl_2、CHCl_3和CCl_4对PE液晶结构影响的差别主要是其空间旋转电子云密度分布形状不同所致.空间旋转电子云密度分布呈椭球状的物质有使PE液晶形成六角形H_1相的趋向;呈圆锥状的物质有诱发PE液晶形成立方六角相的趋向;呈球状的物质有使PE液晶形成片层立方相的趋向.     

铟锡氧化物(ITO)纳米颗粒的制备及表征

以金属In和SnCl₄·5H₂O为主要原料，加入保护剂PVP，利用化学共沉淀法合成了球形的铟锡氧化物(ITO)纳米颗粒。分别对PVP的用量、溶液的pH值、热处理温度等因素对ITO纳米颗粒粒径的影响进行了分析。并且借助透射电镜(TEM)、X射线衍射(XRD)对所合成的ITO纳米颗粒进行了表征。XRD分析说明本文合成了金刚砂型结构的铟锡氧化物纳米颗粒，并且其晶型结构随着热处理温度的升高而转变为铁锰矿型。     

剪切作用下纳米粘土对LDPE熔体粘弹响应的影响

以LDPE/EVA/纳米粘土复合体系为研究模型,考察了剪切作用下,分散良好的纳米粘土对聚合物基体熔体稳态及瞬态粘弹响应的影响.发现剪切作用下,纳米粘土增加了聚合物熔体粘弹特性对剪切速率、剪切应变及剪切作用史的依赖性,改变了相应的依赖关系.稳态剪切时,纳米粘土的加入使体系第一法向应力差(N1)在低剪切速率区变为负值,而在高剪切速率区N1与粘土的含量无关;同时就瞬态剪切应力及N1的应变依赖关系而言,复合体系明显不同于聚合物基体;预剪切对聚合物基体瞬态粘弹响应几乎没有影响,而当纳米粘土的加入量大于3wt%后,与未经预剪切的样品相比较,经预剪切的复合体系的瞬态剪切应力值、应力过冲程度以及稳态剪切应力值均明显下降,且预剪切前后复合体系达到稳态时其瞬态剪切应力差值随纳米粘土含量的增高而线性增加.此外,纳米粘土的添加对聚合物熔体受剪切作用的非线性粘弹响应存在影响.复合体系熔体呈现特异非线性粘弹响应,其缘由被认为是由于纳米粘土在聚合物基体中剥离分散,或聚合物分子链插层于粘土片层间,形成局部有序结构,受剪切作用而排列取向.     

Accelerated reactions of amines with carbon dioxide driven by superacid at the microdroplet interface

Microdroplets display distinctive interfacial chemistry, manifested as accelerated reactions relative to those observed for the same reagents in bulk. Carbon dioxide undergoes C–N bond formation reactions with amines at the interface of droplets to form carbamic acids. Electrospray ionization mass spectrometry displays the reaction products in the form of the protonated and deprotonated carbamic acid. Electrosonic spray ionization (ESSI) utilizing carbon dioxide as nebulization gas, confines reaction to the gas–liquid interface where it proceeds much faster than in the bulk. Intriguingly, trace amounts of water accelerate the reaction, presumably by formation of superacid or superbase at the water interface. The suggested mechanism of protonation of CO₂ followed by nucleophilic attack by the amine is analogous to that previously advanced for imidazole formation from carboxylic acids and diamines.

Microdroplets display distinctive interfacial chemistry, manifested as accelerated reactions relative to those observed for the same reagents in bulk.     

Comparative in vivo constituents and pharmacokinetic study in rats after oral administration of ultrafine granular powder and traditional decoction slices of Chinese Salvia

Salvia miltiorrhiza, one of the most well‐known herbal medicines, is commonly used for the treatment of coronary heart diseases in China. Besides traditional decoction slices (TDS), another relatively new product of S. miltiorrhiza, ultrafine granular powder (UGP; D90 < 45 μm), is also increasingly being used. In this paper, a UHPLC‐LTQ‐Orbitrap MS technique was developed for a metabolite profile study after oral administration of UGP and TDS of S. miltiorrhiza. The results showed that the number of in vivo absorbed compounds from UGP was much greater than that from TDS, and different types of products from S. miltiorrhiza will have different metabolic processes in vivo. Furthermore, a UHPLC‐Q‐Trap MS/MS method for simultaneously determining four tanshinones (tanshinone IIA, dihydrotanshinone I, tanshinone I and cryptotanshinone) was established and applied to assess the pharmacokinetics of the two types of products. All of the analytes displayed significant higher area under the concentration–time curve and peak concentration after oral administration of UGP than after TDS, indicating that ultrafine powder product could improve the bioavailability and absorption of cryptotanshinon,tanshinone II A,dihydrotanshinonE I and tanshinone I in vivo. The present study provides scientific information for further exploration of the pharmacology of these two types of S. miltiorrhiza and offers a reference for clinical administration of S. miltiorrhiza.     

水热法制备Pr掺杂Bi2WO6三维花状微球的光催化性能

通过水热法制备稀土Pr掺杂Bi₂WO₆三维花状微球,利用XRD、SEM、N₂吸附-脱附、紫外-可见吸收光谱和光致发光光谱对所制备的光催化材料进行表征。通过降解亚甲基蓝评价样品的光催化活性。结果表明,1.0% Pr-Bi₂WO₆样品的可见光催化活性最佳,降解率达到95%。Pr掺杂提高了催化剂的可见光吸收性能并且能够束缚光生电子使得电子空穴对有效分离从而获得强氧化物质。对其光催化降解做出了合理的解释。     

复合软模板法可控制备红毛丹状AlOOH/Al2O3纳米材料

以Al(NO₃)₃为铝源,尿素为均相沉淀剂, 在聚乙二醇400(PEG4000)-DL-天冬氨酸形成的复合软模板体系中, 通过简单的常压回流方式成功合成出形貌和尺寸较为均一的红毛丹状γ-AlOOH纳米结构, 继而考察了反应物和添加剂用量对前驱体形貌和尺寸的影响, 并对γ-AlOOH纳米结构可能的形成机理进行了探讨. 实验结果表明, 所合成的红毛丹状γ-AlOOH具有球中球的核壳结构, 统计得内球直径约为400 nm, 外壳外径约为600 nm, 密集状态的壳层厚度约为15 nm, 毛刺状凸出物长度可达60 nm以上. 前驱体样品经600℃煅烧5 h后即转变为具有良好形貌继承性的γ-Al₂O₃, Brunauer-Emmett-Teller (BET) N₂-吸附实验表明其比表面积高达299.97 m²·g^-1.